This is how to allow your PS4 controller to connect to your PC.DS4 Link: Locate the small reset button on the back of the controller. Use a pin or similar tool (not included) to press the reset button. This will not reconfigure the controller or affect pairing and profile settings. Connect the controller to your PlayStation®5 console using the USB cable that came with your controller, and press the PS button. Reboot your router and modem and restart the PS4. Unplug the PS4 and your modem/router for about two minutes. Then plug the modem/router back in and turn the console on. Check to see if you can connect to the internet. Upgrade the router firmware. An update might fix the issue. Connect to another Wi-Fi channel. To do this fix, follow the steps below: Turn your PS4 console off by pressing the Power button and unplug your console from the socket. Next, connect your PS4 controller to the console and press both the PS and Share buttons on the controller. Hold onto the buttons until the indicator light on your controller starts blinking. We show you how to fix ps4 controller not connecting to ds4windows in this video. For more videos like this then please leave a like.GuideRealm is the home o I meant for those games that do have PS4 controller support. Remove your DSWindows. As long as it is installed, it will grab all PS gamepads for itself, passing them on to the rest of the system as XInput. To get the games' native PS gamepad support, the games need to be aware of the PS gamepad's existence. Dxdlm1. Turn over the controller. Four screws should be visible there. Find the reset button in a little hole near the upper right-hand screw. Press and hold the button for 5 seconds with a paperclip, toothpick, or similar object. After resetting, you may need to link and re-sync your controller with the console. A soft reset will simply restart your PS4 controller and will often fix the problem. To do a PS4 controller soft reset, simply press and hold the PS button (the large button in the center of the controller) for about 10 seconds. This will restart the PS4 controller and hopefully fix the problem. 4. Hard Reset Your Controller. If a PS4 How to fix 'Driver Error' with PS4 controller on windows.(works for other devices as well)Subscribe and Like!!Click on this link: Here are the steps: Turn off and unplug the PS4 console. Locate the small reset button on the back of the controller, near the L2 button. Use a pin or small object to press and hold the reset button for 3-5 seconds. Release the button and reconnect the controller to the console using a USB cable. To refresh the PS4 cache, follow these steps: Turn off the PS4 normally. Then, unplug the cable from the power source. Wait for 30 seconds. Turn the PS4 back on. Once the PS4 has been restarted

how to fix ps4 controller not connecting to ps4