Select “ Network Options: Adapters -> ” and hit Enter on the screen that appears after executing the command. On the new screen that appears, select “ WIFI ” and hit Enter. You will see a screen similar to the image below where you must choose the “ Scan and Configure SSID ” menu and hit Enter. Scan for WIFI Networks. Access the mobile hotspot Admin Page. Select the Settings tab. Select Wi-Fi Settings. Under the SSID heading, change the name that appears in the Network Name (SSID) field. For Broadcast Network Name you may select enable or disable for broadcasting the hotspot’s Network Name (SSID). Select Apply to save your changes. I am confused as to how the DHCP works when using up the Android phone as a wireless hotspot/router and wanted to figure that out. One of my attempts to get this information for myself was to try and navigate to 192.168.6.1 via a web browser - this is, of course, the phone's IP address. I was hoping to see some sort of router setup page as you What you need for your devices to have the same IP address, you need a router and a LAN. Then you can set up as desired. With a Hotspot, you cannot practically have static IP or unchanging IP addresses. I use a LAN most of the time and hotspots occasionally. The Hotspot does not always have the same addressing which is the problem. Step 5: Change NAT Type. In the properties window, click on the “Networking” tab. Under the “This connection uses the following items” section, scroll down and locate “Internet Protocol Version 4 (TCP/IPv4)”. Select it and click on the “Properties” button. Connect the Airtel 4G hotspot device to your computer using the microUSB cable included in the box. Then press the button in the middle of the device for a few seconds until both the lights turn on. If both the lights are not ON, press again and release after a few seconds. When the device is ON and Wi-Fi hotspot is active, the admin screen wUwkun. This IP address should be in a IPv4 format. There are 3 common ways to find your Hotspot’s IP address: Generate a Diagnostic Report via Helium or Linxdot Hotspot app. Access your internet router's dashboard. Download a third-party LAN scan software. 2. Login with username and password. Once you enter your Hotspot’s local IP in a web browser Go to IP > Pool menu item. IP Pool window will appear. Click on PLUS SIGN (+). New IP Pool window will appear. Put a Pool name (example: Hotspot Pool) in Name input field. Now put IP range (example: 192.168.30.2-192.168.30.254) in Addresses input field. Click Apply and OK button. New IP Pool for Hotspot Server. Learn how you can set your WiFi IP settings to DHCP or static on the Galaxy S21/Ultra/Plus.Gears I use:Velbon Sherpa 200 R/F Tripod With 3 Way panhead https: Now your connected devices should be issued an ip address under the same subnet as the ip you entered. In this example it would be 192.168.125.x. To get a static ip, do that on the client side device. Set a manual ip for this hotspot connection under same subnet, using the same subnet mask and gateway that were entered in the Hotspot connection Under Edit IP settings, choose Manual, then turn on IPv4. To specify an IP address, in the IP address, Subnet prefix length, and Gateway boxes, type the IP address settings. To specify a DNS server address, in the Preferred DNS and Alternate DNS boxes, type the addresses of the primary and secondary DNS servers. To specify IPv6 settings manually.

how to change hotspot ip address